Welcome to our blog post on how to change the running board lights on a Ford Excursion. There’s nothing quite like cruising down the road in your Ford Excursion, but when those running board lights start to go out, it can put a damper on your driving experience. Luckily, changing the lights on your Excursion is a relatively simple task that you can easily do yourself.
In this guide, we’ll walk you through the step-by-step process so that you can get your running board lights shining brightly once again. So let’s get started and shed some light on this DIY project!
Table of Contents
Introduction
If you own a Ford Excursion and are looking to change the running board lights, you’ve come to the right place! Whether you want to replace a burnt-out bulb or upgrade to a more stylish option, changing the running board lights on your Ford Excursion is a relatively simple process. First, locate the running board lights on your vehicle. These lights are usually found underneath the vehicle, near the running boards.
Next, use a flathead screwdriver or a trim tool to gently pry off the lens cover of the running board light. Inside, you’ll find the bulb, which you can easily twist and remove. Make sure to note the bulb’s type and wattage before purchasing a replacement.
Finally, install the new bulb by inserting it into the socket and twisting it until it locks into place. Then, replace the lens cover and test the new running board lights to ensure they are working properly. With just a few simple steps, you can change the running board lights on your Ford Excursion and give your vehicle a fresh new look.
Overview of Ford Excursion running board lights
Ford Excursion running board lights Introduction Running board lights are a popular aftermarket accessory for many vehicles, including the Ford Excursion. These lights provide additional illumination to help drivers see the area around their vehicle, making it easier to enter and exit the vehicle at night. They also add a stylish touch to the vehicle, enhancing its overall look.
In this blog post, we will take a closer look at Ford Excursion running board lights and discuss their benefits and installation process. Whether you’re looking to improve the functionality or aesthetics of your Excursion, running board lights are a great option to consider. So let’s dive in and explore everything you need to know about these lights for your Ford Excursion.
Importance of maintaining and replacing running board lights
running board lights, maintaining and replacing running lights Introduction: Running board lights are an important safety feature on vehicles that help to enhance visibility, especially at night or in adverse weather conditions. These lights are typically located on the sides of a vehicle’s running boards or step bars, illuminating the ground below and providing additional lighting for passengers entering or exiting the vehicle. While they may seem like a small detail, maintaining and replacing running board lights is crucial for several reasons.
In this blog post, we will explore the importance of these lights and why regular maintenance and replacement are necessary.
Gather Necessary Tools and Materials
So, you’ve noticed that the running board lights on your Ford Excursion need to be changed. No worries, it’s a relatively simple task that you can easily do yourself! To get started, you’ll need a few tools and materials. First and foremost, you’ll need replacement running board lights specifically designed for your Ford Excursion.
These can be purchased at your local auto parts store or online. Additionally, you’ll need a screwdriver (either flathead or Phillips, depending on the type of screws holding the lights in place), a small wrench or socket set (to remove any bolts securing the lights), and a pair of gloves to protect your hands during the process. Once you have all of these tools and materials gathered, you’ll be ready to get down to business and change those running board lights on your Ford Excursion in no time!
List of tools and materials needed for the task
When it comes to taking on a new project, having the right tools and materials can make all the difference. Whether you’re a seasoned DIY enthusiast or just starting out, it’s important to gather the necessary items before diving in. Here is a handy list of tools and materials that you’ll need for your next task.
First and foremost, a good set of basic hand tools is essential. This can include items such as a hammer, screwdrivers, pliers, and wrenches. These tools will come in handy for a wide variety of tasks and projects.
Additionally, you’ll want to have a set of power tools on hand. This can include a drill, circular saw, and jigsaw. These tools will allow you to tackle projects that require a little more power and precision.
In terms of materials, it’s important to have a variety of fasteners such as nails, screws, and bolts. Additionally, you’ll want to have some basic building materials such as lumber, plywood, and drywall. Depending on the project, you may also need specialized materials such as paint or tile.
By gathering these tools and materials ahead of time, you’ll be well-prepared to tackle any task that comes your way.
Where to purchase the required items
In order to successfully complete any project, it’s important to gather all the necessary tools and materials beforehand. When it comes to purchasing these items, there are several options available to you. One option is to visit your local home improvement or hardware store.
These stores typically have a wide selection of tools and materials for various projects. Another option is to shop online. Many retailers now have websites where you can browse and purchase items from the comfort of your own home.
Additionally, you may also consider checking out classified ads or online marketplaces, where individuals often sell used tools and materials at a discounted price. No matter where you decide to make your purchase, it’s important to do your research beforehand to ensure that you are getting the best quality items at the most affordable price. So, whether you’re in need of a hammer, paintbrushes, or building materials, there are plenty of options available to you to gather all the tools and materials you need for your project.
Happy shopping!
Preparation
If you own a Ford Excursion and you’re looking to change the running board lights, don’t worry, it’s a relatively simple process. First, gather all the necessary tools and equipment, such as a flathead screwdriver and a new set of running board lights. Then, locate the running board lights on your Excursion.
These lights are usually found on the bottom portion of the running board itself. Once you’ve located the lights, use the flathead screwdriver to gently pry off the old lights from the running board. Be careful not to damage the running board or the surrounding area.
Once the old lights are removed, take the new set of lights and carefully insert them into the slots where the old lights were. They should fit snugly and securely. Once all the lights are in place, give them a quick test to ensure they’re working properly.
And just like that, you’ve successfully changed the running board lights on your Ford Excursion!
Park the vehicle on a flat surface and turn off the engine
When it comes to preparing your vehicle for maintenance or repairs, one of the first steps is to park it on a flat surface and turn off the engine. This may seem like a simple task, but it’s an important one that shouldn’t be overlooked. Parking on a flat surface ensures that the vehicle is stable and won’t roll or shift while you’re working on it.
This is especially crucial if you’re going to be working underneath the vehicle or using tools that could cause it to move. Turning off the engine is also necessary for safety reasons. It eliminates the risk of the vehicle unexpectedly starting or moving while you’re working on it.
So, before you get started on any maintenance or repairs, take a moment to find a level spot to park and turn off the engine to ensure a safe and stable working environment.
Locate the running board lights on the Ford Excursion
“running board lights on the Ford Excursion” Have you ever been in a situation where you needed to find the running board lights on your Ford Excursion? Well, you’re not alone! Many Excursion owners have had the same question. The running board lights on the Ford Excursion are located on the underside of the vehicle, just below the doors. They are usually small, rectangular lights that provide additional visibility at night, making it easier to step in and out of the vehicle safely.
These lights are not only functional but also add a touch of style to your Excursion. So, the next time you need to find the running board lights on your Ford Excursion, simply look under the doors, and you’re sure to find them shining brightly!
Disconnect the battery to ensure safety
Disconnecting the battery is an essential step in preparing for any electrical work on your vehicle. Safety should always be your top priority, and disconnecting the battery is a simple yet effective way to ensure that no electrical current is running through the vehicle while you work. By disconnecting the battery, you eliminate the risk of accidentally coming into contact with live wires or causing a short circuit.
It’s a bit like turning off the power to a house before doing any electrical repairs, you wouldn’t want to risk getting shocked, right? So, before you start tinkering under the hood, take a moment to disconnect the battery and keep yourself safe.
Removing the Old Running Board Lights
If you own a Ford Excursion and you’re looking to change the running board lights, you’re in luck! In this article, we will guide you through the process of removing the old running board lights. First, locate the running board lights on both sides of your vehicle. These lights are usually attached near the bottom edge of the running boards.
Once you’ve found the lights, you’ll need to remove the screws or bolts that are holding them in place. Use a screwdriver or a wrench to carefully loosen and remove these fasteners. Be sure to keep track of the screws or bolts, as you’ll need them when installing the new lights.
After removing the fasteners, the old running board lights should easily come off. Gently disconnect any wiring or connectors that are attached to the lights. Take note of how the wires are connected for easy reinstallation later.
Now that the old lights are out, you can proceed to install the new running board lights. But don’t worry, we’ll cover that in the next section! So stay tuned for step-by-step instructions on how to change the Ford Excursion running board lights.
Step-by-step instructions for removing the old lights
“removing the old running board lights” Removing the old running board lights may seem like a daunting task, but with a few simple steps, you can easily replace them with new ones. First, locate the screws or bolts that are holding the old lights in place. Use a screwdriver or wrench to remove them and set them aside.
Once the screws or bolts are removed, gently pull the old lights away from the running boards. Be careful not to yank them too forcefully, as they may be connected to the wiring harness. Next, locate the wiring harness connected to the old lights.
Depending on the type of connection, you may need to unplug the harness or unscrew it from the back of the lights. Once the harness is disconnected, set the old lights aside. Now you are ready to install the new lights.
Simply reverse the steps you took to remove the old lights. Connect the wiring harness to the back of the new lights, ensuring a secure connection. Then, align the new lights with the holes on the running boards and insert the screws or bolts to hold them in place.
Tighten the screws or bolts until the lights are securely attached. Finally, test the new lights to ensure they are working properly. With these simple steps, you can easily remove the old running board lights and replace them with new ones.
Tips for handling fragile components
Removing the old running board lights can be a delicate task that requires caution and a steady hand. These lights are often made of fragile materials that can easily break or crack if mishandled. To ensure a smooth removal process, it is important to follow a few tips for handling these components.
Firstly, it is important to have the right tools for the job. A set of screwdrivers with various sizes and types will come in handy when removing the screws that hold the lights in place. It is important to choose the right size screwdriver to avoid stripping the screws or damaging the surrounding area.
Before attempting to remove the lights, it is important to disconnect the power source. This can usually be done by turning off the vehicle’s electrical system or removing the fuse that supplies power to the lights. This step is crucial for your safety and to avoid any damage to the electrical system.
Next, it is important to take your time and work carefully. Start by removing any screws or bolts that hold the lights in place. It may be helpful to use a flashlight to get a better view of the area and ensure that you don’t miss any screws.
Once the screws are removed, gently pull the lights away from the running board. Take care not to pull too hard, as this can cause damage to the wires or connections. If the lights seem stuck, carefully use a flathead screwdriver or a plastic prying tool to gently separate them from the running board.
Once the lights are removed, be sure to place them in a safe and secure location. Wrap them in a soft cloth or bubble wrap to protect them from any potential damage during storage or transportation. By following these tips and taking the necessary precautions, you can safely remove the old running board lights without causing any damage to the fragile components.
Installing the New Running Board Lights
If you’re looking to upgrade the running board lights on your Ford Excursion, you’re in luck. Changing the running board lights is a fairly straightforward process that you can do yourself. Begin by locating the old lights underneath the vehicle.
Once you’ve found them, remove the screws or bolts that are securing them in place. Gently pull the old lights out and disconnect the wiring harness. Now, take your new running board lights and connect the wiring harness.
Slide the new lights into place and secure them with screws or bolts. Finally, test the lights to make sure they are working properly. Changing the running board lights on your Ford Excursion is a simple way to give your vehicle a fresh look and enhance its visibility while driving at night.
So why not give it a try and see the difference for yourself?
Step-by-step instructions for installing the new lights
Installing the new running board lights is a straightforward process that can add a stylish touch to your vehicle. To begin, gather all the necessary tools, including a screwdriver, wire cutters, electrical tape, and a wiring harness. Start by locating the existing running board lights and remove them by unscrewing them from the running board.
Next, take the new lights and connect them to the wiring harness using the wire connectors. Make sure to match the positive and negative terminals correctly. Once the lights are connected, use electrical tape to secure the connections and prevent any exposed wires.
Finally, carefully position the new lights onto the running board and secure them in place with the screws provided. With these easy steps, you’ll have your new running board lights installed in no time, giving your vehicle a stylish and unique look.
Testing the lights before final installation
installing running board lights Renovating a vehicle can be both exciting and challenging, especially when it comes to installing new accessories. One such addition that can greatly enhance the appearance and visibility of a vehicle is running board lights. These lights not only provide an extra touch of style but also serve a practical purpose by illuminating the running boards and making it easier for passengers to enter and exit the vehicle safely.
Before the final installation, it is important to test the lights to ensure they are functioning properly. This will save time and avoid any potential issues that may arise after the lights have been permanently installed. Plus, it’s always better to be safe than sorry! So let’s take a look at how to test the lights before their final installation.
Firstly, it is essential to have a power source ready. Most running board lights come with a wiring harness that needs to be connected to the vehicle’s electrical system. You can either attach the wiring harness directly to the battery or use a relay switch connected to the vehicle’s fuse box.
Once the power source is set up, it’s time to connect the running board lights to the wiring harness. To test the lights, turn on the vehicle’s ignition and activate the running board light switch. If the lights turn on, congratulations, you’re one step closer to completing the installation process! However, if the lights don’t turn on, don’t panic just yet.
Check the connections between the wiring harness, the lights, and the power source. Ensure that all the wires are properly connected and not damaged. Sometimes, a loose or faulty connection can prevent the lights from turning on.
If the connections are secure and the lights still don’t turn on, it’s time to troubleshoot further. Test the wiring harness with a multimeter to check if power is flowing through it. If there’s no power, there may be an issue with the wiring harness itself.
Final Steps
If you’re looking to change the running board lights on your Ford Excursion, you’re in luck! This simple DIY project can help enhance the look of your vehicle while also increasing visibility and safety. To start, locate the running board lights on your Excursion. These are typically found on the bottom of the running boards and can be easily accessed.
Using a screwdriver or socket wrench, remove the screws or bolts securing the light housing in place. Once the housing is removed, carefully disconnect the wiring harness connected to the old light assembly. Now, you can install your new running board lights.
Simply connect the wiring harness to the new light assembly and secure it back into place using the screws or bolts. Once everything is securely installed, test the lights to ensure they are working properly. And just like that, you’ve successfully changed the running board lights on your Ford Excursion!
Reconnecting the battery
After completing all the necessary repairs and installations, it’s finally time to reconnect the battery and get your car up and running again. This is a crucial step that shouldn’t be overlooked, as the battery is what powers the entire electrical system of the vehicle. To reconnect the battery, start by taking off any protective covers from the terminals.
Then, carefully attach the positive (red) terminal first, followed by the negative (black) terminal. Make sure to tighten the connections securely to ensure good contact. Once the battery is connected, you can turn the ignition on and check if all the electrical components are working properly.
If everything looks good, you’re all set to hit the road again! Just remember to dispose of any old or damaged batteries properly and safely.
Checking if the lights are functioning properly
lights functioning, final steps
Conclusion
And there you have it, folks! With these simple steps, you can easily change the running board lights on your Ford Excursion. Whether you’re illuminating the way for your passengers or just want to add some extra pizzazz to your ride, this DIY project is sure to shine a light on your skills. So grab your tools, get ready to get lit, and let your Ford Excursion glow like it’s ready for the red carpet!”
Summary of the process and the importance of maintaining running board lights
running board lights, maintenance, importance In the final steps of the process, it’s crucial to ensure that the running board lights are properly maintained. These lights play a significant role in the overall safety and visibility of your vehicle. They not only enhance the aesthetics but also serve as a warning signal for other drivers on the road.
By regularly checking and cleaning the lights, you can ensure that they are in proper working condition. This includes inspecting for any burnt-out bulbs, loose wiring connections, or damage to the housing. Proper maintenance of running board lights can prevent accidents by improving visibility in low light conditions and preventing collisions with other vehicles or pedestrians.
So, don’t overlook the importance of maintaining your running board lights and make it a part of your regular vehicle maintenance routine.
FAQs
How do I change the running board lights on a Ford Excursion?
To change the running board lights on a Ford Excursion, you will first need to locate the lights on the underside of the vehicle. Once located, you can remove the old lights by disconnecting any wiring or screws that may be holding them in place. Then, simply install the new lights by reversing the removal process. It’s always a good idea to consult your vehicle’s manual for specific instructions and safety precautions.
Are there any special tools required to change the running board lights on a Ford Excursion?
In most cases, you will not need any special tools to change the running board lights on a Ford Excursion. However, it’s always a good idea to have a basic set of tools on hand, such as a screwdriver and wire cutters, in case you encounter any unexpected obstacles during the installation process.
Can I change the running board lights on a Ford Excursion myself, or should I take it to a professional?
Changing the running board lights on a Ford Excursion is generally a straightforward process that can be done by most DIY enthusiasts. However, if you are not comfortable working on your vehicle or if you have limited experience with automotive electrical systems, it may be best to take it to a professional to ensure the job is done correctly and safely.
How often do I need to change the running board lights on a Ford Excursion?
The frequency at which you need to change the running board lights on a Ford Excursion can vary depending on factors such as usage and environmental conditions. However, as a general guideline, it’s recommended to inspect and replace any burned-out or damaged lights as soon as possible to ensure optimal visibility and safety.
Can I upgrade the running board lights on a Ford Excursion to LED lights?
Yes, it is possible to upgrade the running board lights on a Ford Excursion to LED lights. LED lights are known for their energy efficiency, durability, and brighter illumination. However, it’s important to ensure that the LED lights you choose are compatible with your vehicle’s electrical system and meet any legal requirements or regulations in your area.
Are there any aftermarket running board light options available for a Ford Excursion?
Yes, there are aftermarket running board light options available for a Ford Excursion. These options can vary in terms of design, brightness, and features. It’s always a good idea to research and compare different aftermarket options to find the one that best fits your preferences and needs.
Can I change the color of the running board lights on a Ford Excursion?
Yes, it is possible to change the color of the running board lights on a Ford Excursion. There are various aftermarket options available that offer different color options, such as RGB LED lights that allow you to customize the color and even create different lighting effects. However, it’s important to check local regulations regarding the use of colored lights on vehicles to ensure compliance.
