Closing an RV awning can seem like a daunting task, even for seasoned camping veterans. But fear not, for it’s actually simple once you get the hang of it. In this blog post, we’ll walk you through the steps to close your RV awning so you can pack up and hit the road in no time.
Whether you’re an RV newbie or a seasoned pro, knowing how to properly close your awning is crucial for keeping your RV safe and secure while on the move. So grab a cup of coffee and let’s get started!
Table of Contents
Step 1: Release the Tension
If you’re wondering how to close a RV awning, the first step is to release the tension. Before you can retract the awning, you need to release the tension on the arms. This will make it easier to close and prevent damage to the awning or the RV.
To release the tension, locate the tension knobs on each of the awning arms and turn them counterclockwise until you feel the tension release. Be sure to hold onto the awning as you do this because once the tension is released, the arms will spring outward. If you’re unsure about how to release the tension or still having trouble, consult your RV’s owner’s manual or seek advice from a professional.
Remember, releasing the tension is just the first step in closing a RV awning properly.
Extend the awning fully
When it comes to extending the awning on your RV or camper, there are a few necessary steps you need to follow. The first step is to release the tension on the awning to prevent any potential damage or injury. To do this, locate the tension knobs located on either side of the awning and turn them counterclockwise.
This will loosen the tension on the awning and make it easier to extend. Be sure to turn the knobs slowly and evenly to avoid any sudden releases of tension. Once the tension is released, you can begin to extend the awning fully.
This will provide you with ample shade and protection from the sun’s harmful rays. By following these steps, you can ensure the longevity of your awning and enjoy a comfortable outdoor experience.
Locate the tension knobs or levers on both ends of the awning
If you’re looking to release the tension on your awning, the first step is to locate the tension knobs or levers located on both ends of the awning. These knobs or levers are responsible for tightening or loosening the tautness of the awning fabric. In order to release the tension, you’ll need to turn the knobs or levers counterclockwise, which will loosen the fabric.
It’s important to remember that you don’t want to completely release all of the tension, as this can cause the fabric to sag and potentially cause damage. Instead, aim for a slight looseness that allows for some movement in the wind but still keeps the fabric taut. Once you’ve released the tension on both ends of the awning, you can now start to roll up or fold your awning without causing any unnecessary strain or wear on the fabric.
With this simple step, you can ensure that your awning will last for many years to come.
Release the knobs or levers to loosen the tension
If you’re trying to fix a mechanical or electrical device, the first step in loosening the tension is to release any knobs or levers that control it. This step is essential to avoid any damage to the device or cause any injury to yourself. These knobs or levers are usually located near the part of the device where the tension is located, and once you release them, you should feel the tension start to disappear.
A common example of this is when you’re trying to change a blade on a table saw. You need to release the blade tension before you can safely remove and replace the blade. Similarly, when working with a sewing machine, you need to release the tension on the thread before changing the bobbin or needle.
By releasing the knobs or levers and loosening the tension, you can proceed with confidence knowing that you have taken the important first step safely.
Step 2: Roll up the Awning
Now that you’ve safely released the awning, it’s time to roll it up and prepare it for your next adventure. Start by grabbing the awning and pulling it towards the RV. Make sure to keep it straight and taut as you roll it up, and be careful not to crease or fold the material.
As you roll, you may need to adjust the tension on the spring to ensure that the awning is evenly rolled up. Once it’s securely rolled up, you can fasten the straps or latches to keep it in place during transit. Don’t forget to double-check that all of the support arms are securely stowed away before hitting the road.
Closing an RV awning may seem intimidating, but with a little practice, you’ll soon be a pro at prepping your home on wheels for travel.
Stand to the side of the awning and grab the strap or handle on the roller
When it comes to taking down your awning, the second step is to roll it up. To do this, you will want to stand to the side of the awning and grab the strap or handle on the roller. This is an important step to remember because rolling up the awning properly will ensure its longevity and prevent any damage to the fabric or frame.
As you start to roll up the awning, make sure it is moving evenly and that it is not getting bunched up or wrinkled. Keep in mind that burstiness is key here – it’s better to roll it up slowly and steadily than to rush it and risk damaging it. Also, consider the weight of the awning and how much resistance it may have.
It’s important to take your time and use your strength to roll it up safely. With these tips in mind, rolling up your awning can be an easy and stress-free task.
Slowly roll up the awning, making sure it stays level and straight
Roll up the awning slowly and carefully to ensure it stays level and straight. This is an important step in maintaining your awning, as uneven rolling can cause damage over time. Start by gently pulling the fabric down towards the ground, using both hands to guide it along the metal frame.
Keep your movements slow and steady, checking frequently to make sure the fabric is not bunching or skewing. It can be helpful to have a partner hold the other end of the awning to help keep it straight. As you continue to roll, use your body weight to maintain tension on the fabric and prevent any snags or kinks.
Take your time and be gentle with the awning, and it will last for years to come.
Secure the awning with the strap or latch on the roller
When it comes to securing your awning, one of the most important steps is to roll it up properly. To do this, you’ll want to start by making sure that the awning is secured to the side of your RV using the strap or latch on the roller. This will help prevent it from flapping around in the wind or getting damaged while you’re on the road.
Once it’s secure, you can start rolling up the awning by turning the handle on the roller. Be sure to go slowly and keep an eye out for any signs of damage or wear and tear on the fabric or mechanism. If you notice anything that looks off, it may be a good idea to have the awning inspected by a professional before you continue using it.
Finally, once the awning is fully rolled up, you can use the locking mechanism on the roller to keep it in place and prevent it from unrolling accidentally. By following these steps, you can ensure that your RV awning is properly rolled up and ready to go whenever you are.
Step 3: Secure the Awning
Now that your RV awning is rolled up, it’s time to secure it in place. This step is extremely important to prevent any damage from wind or other weather conditions. First, make sure that both arms of the awning are properly attached to the RV and locked into place.
Then, check to see if your awning comes with straps or clamps. If so, use those to secure the awning together. If not, you can use bungee cords or rope to tie it up tightly.
Just be sure not to over-tighten, as this could damage the awning or RV. With the awning securely in place, you’ll be able to rest easy knowing that it won’t come loose, even in strong winds. So, make sure to take the time to properly secure your awning before heading out on the road.
Make sure the awning is securely latched to the side of the RV
When it comes to setting up your RV awning, it’s important to make sure it’s securely latched to the side of your RV. Awnings can provide a fantastic way to relax and enjoy the outdoors, but if they come loose, they can be dangerous and cause significant damage to your property. To secure the awning, start by extending the arms out and positioning them in the right place.
Once you’ve done this, double-check that the awning is level and straight before securing it with a latch. The latch will keep the awning in place, so it won’t start flapping around in the wind and won’t accidentally retract. When you’re ready to pack up and leave, be sure to release the latch and pack up the awning properly to avoid any damage or wear and tear.
By taking the time to properly secure your RV awning, you can enjoy your time outside safely and comfortably!
Double-check the tension to ensure it is secure and snug
When it comes to securing your awning, you want to make sure that it’s tightly fastened and won’t come loose during a gust of wind or a heavy rain. That’s where double-checking the tension comes into play. First, make sure that all of the straps and buckles are properly fastened and tightened.
Then, give the awning a good tug to make sure that it’s secure and snug. If it feels loose, adjust the tension until it feels tight. It’s also important to remember that you don’t want to overtighten the awning as this can cause damage to the fabric or the hardware.
The key is to find the perfect balance between a secure hold and not putting too much strain on the awning. By taking the time to double-check the tension, you can rest easy knowing that your awning is securely in place and ready to face whatever weather comes its way.
Conclusion
Closing a RV awning is like folding a map: it may seem confusing at first, but once you get the hang of it, it’s a breeze. Remember to start at the top and work your way down, keeping your eyes peeled for any potential snags. And if all else fails, just channel your inner Mary Poppins and give it a good snap!”
FAQs
How do I manually close my RV awning?
First, locate the awning roller and retracting arm. Then, use a crank handle to manually turn the roller until the awning is completely closed.
What is an RV awning lock and how do I use it?
An RV awning lock is a device that secures the awning arms in place, preventing them from accidentally opening while driving. To use it, simply attach it to the awning arms and lock it in place.
How often should I clean my RV awning?
It is recommended to clean your RV awning at least once a month, or more frequently if you are camping in an area with a lot of dirt or debris.
What should I use to clean my RV awning?
You can use a mild soap and water mixture, or a specialized RV awning cleaner. Avoid using harsh chemicals or high-pressure washers, as this can damage the fabric.
Why won’t my RV awning retract?
There could be several reasons why your RV awning won’t retract, including a faulty motor, damaged awning arms, or debris blocking the retracting mechanism. It is best to consult with a professional technician for repairs.
Can I install an awning on my RV myself?
While it is possible for some DIY enthusiasts to install an RV awning, it is recommended to have a professional technician handle the installation to ensure proper placement and secure attachment.
How long do RV awnings typically last?
The lifespan of an RV awning depends on several factors, including the quality of the material, frequency of use, and weather conditions. On average, a well-maintained RV awning can last anywhere from 5 to 15 years.
