Welcome to our latest blog post, where we’ll be sharing some helpful tips and tricks for removing your Extang tonneau cover. Whether you’re looking to clean or repair your cover, or simply want to change up your truck’s look, removing the tonneau cover is an essential step. But fear not, because we’re here to guide you through the process and make it as easy as possible.
Removing your Extang tonneau cover may seem like a daunting task at first, but with the right approach, it can be a breeze. Think of it as taking off a well-fitted jacket to reveal the true beauty of your truck’s bed. Just like every jacket has its own unique way of fastening, each tonneau cover has its own style of attachment, so it’s important to understand the specific method for your particular model.
Before you dive into the removal process, it’s helpful to have a game plan in mind. Start by grabbing all the necessary tools, such as a socket wrench or a hex key, depending on the type of fasteners used on your cover. It’s also a good idea to gather some rags or a soft cloth to protect the surface of your truck’s bed and the cover itself during the removal process.
Once you’re ready, it’s time to locate the attachment points of your tonneau cover. Most Extang covers use clamps or brackets to secure the cover to the truck bed, while others might have a rail system. Make sure to refer to your cover’s specific installation manual to identify these attachment points.
With the attachment points identified, it’s time to start removing the cover. Begin by loosening the fasteners according to the instructions provided. This might involve loosening nuts or screws, or simply disengaging the clamps or brackets.
Remember, the goal here is to loosen the fasteners without fully removing them, allowing you to easily lift the cover off later. Once you’ve loosened all the necessary fasteners, it’s time for the grand finale – removing the tonneau cover! Gently lift the cover from one side of the truck bed and carefully work your way to the other side, ensuring that the cover is fully detached from all the attachment points. Voila! You’ve successfully removed your Extang tonneau cover, revealing the full potential of your truck’s bed.
Table of Contents
Introduction
Are you looking to remove your Extang tonneau cover but not sure where to start? Don’t worry, we’ve got you covered! Removing an Extang tonneau cover is a relatively simple process that can be done in just a few easy steps. First, locate the release latches on both sides of the tonneau cover. These latches are usually located towards the front of the truck bed.
Once you’ve located the latches, simply pull up on them to release the cover from the brackets. Next, gently lift the tonneau cover off of the truck bed and set it aside. It’s important to note that some Extang tonneau covers may have additional attachment points, such as snaps or straps, so be sure to check for these before attempting to remove the cover.
Once you’ve removed the tonneau cover, you can store it in a safe place until you’re ready to use it again. With just a few simple steps, you can easily remove your Extang tonneau cover and enjoy the convenience of having an open truck bed.
Welcome to our guide on removing your Extang tonneau cover.
Removing an Extang tonneau cover might seem like a daunting task, but with our helpful guide, you’ll have it off in no time. Whether you’re looking to replace your cover, clean your truck bed, or simply want to enjoy the open-air driving experience, removing your tonneau cover is a straightforward process. In this guide, we’ll walk you through each step, providing tips and tricks along the way to ensure a smooth removal.
With a little bit of effort and following our instructions, you’ll have your Extang tonneau cover removed in a jiffy. So let’s get started and make your truck bed access easier than ever before!
In this blog post, we will walk you through step-by-step instructions on how to remove your tonneau cover safely and efficiently.
tonneau cover, remove tonneau cover, step-by-step instructions, safely and efficiently. Intro: Hey there truck owners! Have you been struggling to figure out how to remove your tonneau cover? Well, you’re in luck because in this blog post, we are going to provide you with step-by-step instructions on how to safely and efficiently remove your tonneau cover. We understand that removing a tonneau cover can be a bit tricky, especially if you have never done it before.
But don’t worry, we’ve got your back! By the end of this blog post, you will be able to remove your tonneau cover with ease, giving you the freedom to use your truck bed however you please. So let’s get started, shall we?
Step 1: Gather the necessary tools
To remove an Extang tonneau cover, it is important to have the necessary tools readily available. These tools include a socket wrench, a Phillips head screwdriver, and a set of Allen wrenches. The socket wrench will be used to loosen and remove the clamps that hold the cover in place, while the screwdriver and Allen wrenches will be used to remove any screws or bolts that secure the cover to the truck bed.
It is important to have these tools on hand before attempting to remove the tonneau cover, as they will make the process much easier and more efficient. So, gather your tools and get ready to remove that Extang tonneau cover!
Before you start removing your tonneau cover, make sure you have the following tools ready:
Before you start removing your tonneau cover, it’s important to gather the necessary tools to make the process go smoothly. Having the right tools on hand will help you avoid frustration and ensure that you don’t damage your tonneau cover or truck bed in the process. So, what do you need? Firstly, you’ll need a socket wrench or a screwdriver, depending on the type of fasteners used on your tonneau cover.
This will allow you to easily remove any bolts or screws that are holding the cover in place. Additionally, you may need a pair of pliers to assist with removing any clamp or tension levers. Finally, it’s always a good idea to have a can of lubricant or WD-40 on hand to help loosen any stuck or rusted fasteners.
By having these tools ready before you start, you can make the process of removing your tonneau cover much easier and more efficient.
– Screwdriver
In order to assemble a screwdriver, you will need a few tools to get started. First and foremost, you will need an actual screwdriver handle. This is the part of the screwdriver that you hold onto while using it.
It is typically made of sturdy materials like metal or plastic. The handle should be comfortable to grip and have a good amount of weight to it, as this will help with controlling the screwdriver as you use it. Additionally, you will need the screwdriver bit.
This is the part of the screwdriver that actually fits into the head of the screw. It is often made of durable metal and comes in various shapes and sizes to accommodate different types of screws. The bit should be compatible with the handle, so if you already have a handle, make sure you get a bit that will fit it properly.
If you don’t already have a handle, you can often find screwdriver sets that come with both the handle and multiple bits.
– Pliers
To start a DIY project or tackle a repair job, one of the essential tools you’ll need is a pair of pliers. Pliers are versatile hand tools that come in various shapes and sizes, each designed for specific tasks. Whether you need to grip, twist, cut, or bend something, pliers can be your go-to tool.
They are particularly useful for gripping and manipulating small objects or materials that are difficult to handle with your bare hands. The jaws of pliers can be smooth, serrated, or even have specialized features like wire cutters. They can be made of different materials such as steel, which provides strength and durability.
So, before you begin your project, make sure to gather the necessary tools, including a reliable pair of pliers, to ensure you have everything you need to get the job done efficiently.
– Allen wrench set
In order to successfully assemble your futon frame, you’ll need a few essential tools, including an Allen wrench set. This set typically includes a variety of different sized Allen wrenches that can be used for different purposes. The Allen wrench, also known as a hex key, is a small, L-shaped tool that is specifically designed to turn screws and bolts with hexagonal sockets.
These wrenches are typically made from hardened steel, making them durable and long-lasting. They are an essential tool for many types of furniture assembly, including futon frames. Without an Allen wrench set, you may find it difficult or impossible to tighten the necessary screws and bolts during the assembly process.
So, before you begin assembling your futon frame, be sure to gather all the necessary tools, including an Allen wrench set.
Step 2: Disconnect the tension control system
To remove an Extang tonneau cover, you will need to follow a few steps. The second step is to disconnect the tension control system. This is an important step because it allows you to release the tension on the cover, making it easier to remove.
First, locate the tension control system on your Extang tonneau cover. It is usually located near the front of the cover towards the cab of your truck. You may need to lift a few panels or covers to access it.
Once you have located the tension control system, you will need to disconnect it. This is typically done by loosening the tension knob or lever and pulling it out to release the tension. Make sure to hold onto the knob or lever as you loosen it, as it may spring back quickly.
Once the tension control system is disconnected and the tension is released, you can move on to the next step in removing the Extang tonneau cover. This step is important because it allows you to safely remove the cover without causing any damage or injury. Overall, disconnecting the tension control system is an important step in removing an Extang tonneau cover.
Take your time and follow the instructions provided with your specific cover model to ensure a smooth removal process.
Start by locating the tension control system on your tonneau cover.
When it comes to maintaining your tonneau cover, one important step is to disconnect the tension control system. This system is responsible for keeping the cover taut and preventing any sagging or flapping in the wind. To begin, locate the tension control system on your tonneau cover.
This can usually be found near the rear of the cover, either on the sides or in the center. Once you have located it, you will need to disconnect it in order to release the tension. This can typically be done by loosening the screws or bolts that hold the tension control system in place.
By disconnecting the tension control system, you can ensure that the cover will not be stretched out or damaged when it is not in use. So, take the time to properly disconnect the tension control system and keep your tonneau cover in the best possible condition.
Use your Allen wrench to loosen the screws or bolts that hold the tension control system in place.
In order to disconnect the tension control system on your Allen wrench, you’ll need to use the trusty Allen wrench itself. Start by locating the screws or bolts that hold the tension control system in place. Once you’ve found them, grab your Allen wrench and start loosening them.
This may take a bit of elbow grease, but don’t worry, you’ve got this! As you loosen the screws or bolts, the tension control system will start to come loose from the wrench. Just keep going until it’s fully disconnected. Think of it as untangling a knot – it might take a little time and effort, but once you’re done, you’ll feel a sense of satisfaction at a job well done.
So grab that Allen wrench and get ready to tackle the tension control system on your wrench!
Once the tension control system is detached, carefully lift it off the tonneau cover and set it aside.
In the second step of disconnecting the tension control system, you need to carefully detach it from the tonneau cover. This part requires a bit of caution to avoid any damage or mishaps. First, make sure you have the necessary tools and equipment ready.
Then, gently lift the tension control system off the tonneau cover, ensuring you have a good grip to prevent it from slipping out of your hands. Once you have safely lifted it off, set it aside in a secure place where it won’t get damaged or cause any obstructions. This step is crucial because disconnecting the tension control system is necessary before proceeding with any further maintenance or repairs.
So, take your time and handle it delicately to ensure everything goes smoothly.
Step 3: Remove the bed rail clamps
Removing the bed rail clamps on an Extang tonneau cover is a relatively simple process that can be completed in just a few steps. Start by locating the clamps on the bed rails of your truck. These clamps are what secure the tonneau cover in place, so they will need to be removed in order to take off the cover.
Using a wrench or a socket set, loosen the bolts on the clamps until they are loose enough to slide off the bed rails. Once the clamps are removed, you can carefully lift the tonneau cover off of the truck bed. It’s as easy as that! This step is essential if you need to take off the tonneau cover for any reason, whether it’s for maintenance or to access the bed of your truck.
By following these simple steps, you can remove the bed rail clamps on your Extang tonneau cover quickly and easily.
Next, locate the bed rail clamps that secure the tonneau cover to your truck’s bed.
tonneau cover, truck’s bed, bed rail clamps Alright, so you’ve got your tonneau cover ready to go, but before you can fully install it, you’ll need to remove those pesky bed rail clamps. These clamps are what secure the tonneau cover to your truck’s bed, so it’s important to remove them carefully. First, take a look at the bed rail clamps and locate where they are on your truck.
This may vary depending on the make and model of your vehicle, so it’s always a good idea to consult the instructions that came with your tonneau cover. Once you’ve identified the bed rail clamps, it’s time to get to work. Start by loosening the bolts on each clamp using a socket wrench or a wrench of the appropriate size.
You may need someone to hold the clamp in place as you loosen the bolts, especially if they’re on tightly. After loosening the bolts, you should be able to slide the clamp out of its position. Be careful not to drop it or let it fall onto your truck’s bed, as this can cause damage.
It’s a good idea to have a cloth or towel handy to place the clamp on once it’s been removed. Continue this process for each bed rail clamp, taking your time and being mindful of any cables or wires that may be in the way. Once all the clamps have been removed, you’re ready to move on to the next step in installing your tonneau cover.
Remember, it’s always important to follow the manufacturer’s instructions when installing or removing any part of your truck’s tonneau cover. This will ensure that everything is done correctly and that your cover is securely fastened to your truck’s bed. With the bed rail clamps removed, you’re one step closer to enjoying the benefits of a tonneau cover on your truck.
Use your screwdriver or pliers to remove the screws or bolts that hold the bed rail clamps in place.
“bed rail clamps” In order to remove the bed rail clamps, you’ll need to grab your trusty screwdriver or pliers. These tools will help you unscrew or unbolt the screws or bolts that are holding the clamp in place. It’s important to use the correct tool for the job to ensure a smooth and efficient removal process.
Once you have your tool in hand, locate the screws or bolts on the bed rail clamps. They may be on the top, bottom, or sides of the clamp, depending on the specific design. Take a moment to familiarize yourself with the placement before you start unscrewing or unbolting.
Now, it’s time to get down to business. Begin by firmly gripping the screwdriver or pliers, making sure you have a good grip for maximum torque. Apply pressure to turn the screwdriver or pliers counterclockwise, or to the left, to loosen the screws or bolts.
As you start unscrewing or unbolting, you may encounter some resistance. Don’t worry, this is normal. Just keep applying steady pressure and continue turning counterclockwise until the screws or bolts are completely removed.
If you’re using pliers, make sure to firmly grip the bolt head to prevent slippage. Once all the screws or bolts are removed, you can easily slide the clamp off the bed rail. Be careful not to force it or damage the bed rail in the process.
If the clamp is still stuck, you may need to wiggle it gently or use a bit more force to loosen it. And voila! The bed rail clamps are now removed and you’re one step closer to completing your project. Take a moment to appreciate your handiwork and get ready for the next step in the process.
Gently lift the tonneau cover off the bed rail clamps and set it aside.
To continue removing the tonneau cover from your truck bed, the next step is to remove the bed rail clamps. These clamps are what secure the tonneau cover to the bed rails. Gently lift the tonneau cover off the bed rail clamps and set it aside.
Be careful not to damage the cover or the clamps in the process. It may be helpful to have an extra set of hands to assist you in lifting and holding the cover while you remove the clamps. Once the cover is safely out of the way, you can begin removing the bed rail clamps.
These clamps are typically held in place by bolts or screws. Use the appropriate tool, such as a wrench or screwdriver, to loosen and remove the fasteners. Be sure to keep track of the hardware as you remove it, as you will need it later when reinstalling the tonneau cover.
Once the clamps are removed, set them aside in a safe place. With the clamps removed, you are now ready to move on to the next step in the tonneau cover removal process.
Step 4: Uninstall the support bows
So, you’ve finally decided to remove your Extang tonneau cover. Good choice! It’s always a good idea to have a spare set of hands to help you out, as removing the support bows can be a bit tricky. Start by locating the support bow on each side of your tonneau cover.
These support bows are typically made of aluminum and are what give your cover its shape and structure. Next, you’ll want to carefully unscrew the bolts that hold the support bows in place. It’s important to take your time and make sure you have a firm grip on the bow, as you don’t want it to slip and potentially damage your cover or injure yourself.
Once the bolts are removed, you can gently lift the support bows out of their brackets. Again, be sure to handle them with care and avoid any sudden movements. With the support bows removed, you can now easily roll up or fold your tonneau cover and store it away.
If you plan on reinstalling the cover at a later time, be sure to keep the support bows in a safe place for future use. And there you have it! Removing the support bows from your Extang tonneau cover is a relatively simple process that can be done in just a few steps. Now you can enjoy your truck bed fully open or easily install a different cover if needed.
The support bows are usually located underneath the tonneau cover.
support bows. Step 4 of uninstalling a tonneau cover involves removing the support bows. These support bows are an essential component of the tonneau cover, as they provide stability and structure.
Typically, the support bows are located underneath the tonneau cover, and they can be easily accessed by lifting up the cover. Once you have lifted the cover, you will notice the support bows running across the bed of your truck. To uninstall them, you will need to detach them from their securing mechanisms.
This is usually a simple process that involves unclipping or unscrewing the support bows from their brackets or mounts. You may need to use a screwdriver or a wrench, depending on the type of fasteners used. Once the support bows are detached, carefully remove them from underneath the tonneau cover.
It is important to handle them with care to avoid any damage or injury. With the support bows successfully uninstalled, you are now one step closer to removing your tonneau cover completely.
Carefully remove the screws or bolts that hold the support bows in place using your screwdriver or pliers.
In the next step of uninstalling your convertible top, it’s time to remove the support bows. These are the metal bars that provide the structure and support for your convertible top. To do this, you’ll need to carefully remove the screws or bolts that hold the support bows in place using a screwdriver or pliers.
Make sure to keep track of the screws or bolts as you remove them so that you don’t lose them. Once the screws or bolts are removed, you can gently lift the support bows out of their brackets. Be careful not to force or bend the support bows as you remove them.
Remember, these support bows are an important part of your convertible top’s structure, so handle them with care.
Once the support bows are detached, lift them out from underneath the tonneau cover and set them aside.
Now that you’ve successfully removed the tonneau cover, it’s time to move on to the next step: uninstalling the support bows. These bows are responsible for keeping the tonneau cover in place and providing structural support. To remove them, you’ll need to first locate them underneath the cover.
They are usually positioned towards the rear of the truck bed. Once you’ve identified the support bows, you can begin detaching them. Look for any clips or latches that are securing the bows in place.
Release these clips or latches, and carefully lift the support bows out from underneath the tonneau cover. Be sure to set them aside in a safe location, as you’ll need them again when reinstalling the cover. By removing the support bows, you’re one step closer to completing the removal process and gaining full access to your truck bed.
Step 5: Safely store your tonneau cover
Removing an Extang tonneau cover may seem like a daunting task, but it can be done easily with just a few simple steps. First, make sure your truck bed is clear of any items or debris. Next, locate the latches on either side of the tonneau cover and release them by pushing them towards the center of the truck bed.
Once the latches are released, gently lift the tonneau cover from the front towards the back of the truck bed. Be careful not to strain yourself or damage the cover during this process. Finally, once the tonneau cover is removed, you will need to find a safe and secure place to store it.
This could be in your garage, shed, or another designated storage area. It’s important to keep the tonneau cover protected from the elements and prevent any unnecessary wear and tear. By following these simple steps, you can safely remove and store your Extang tonneau cover whenever needed.
After removing all the necessary components, it’s important to store your tonneau cover properly to prevent damage.
When it comes to taking care of your tonneau cover, proper storage is essential. After removing all the necessary components, such as the tailgate seal and tension adjusters, you’ll want to make sure you store your tonneau cover in a safe and secure location. This will help prevent any damage and ensure that your cover stays in optimal condition for future use.
One option for storing your tonneau cover is to use a weatherproof storage bag specifically designed for tonneau covers. These bags provide protection from the elements and help prevent any scratches or dings that may occur during storage. They also help keep your cover clean and free from dust or debris.
If a storage bag is not available, you can also store your tonneau cover vertically against a wall or in a designated storage area. Just make sure to place something soft, like a towel or blanket, between the cover and the wall to prevent any scratches. When storing your tonneau cover, it’s important to avoid exposing it to extreme temperatures or direct sunlight for extended periods of time.
This can cause the material to warp or fade over time. Instead, choose a cool, dry location away from any potential sources of damage. Taking the time to properly store your tonneau cover will help extend its lifespan and ensure that it stays in the best possible condition.
So don’t overlook this important step in caring for your tonneau cover and enjoy the benefits of a well-maintained cover for years to come.
Clean the tonneau cover to remove any dirt or debris, and then store it in a dry and secure location.
After cleaning your tonneau cover to remove any dirt or debris, it’s important to store it properly to ensure its longevity. Find a dry and secure location to store your tonneau cover, such as a garage or storage shed. This will help protect it from moisture, which can cause damage over time.
Additionally, storing it securely will prevent it from getting lost or damaged by being knocked over or stepped on. Imagine if you left your tonneau cover outside in the rain or wind, it could end up torn or waterlogged, and no one wants that. So take the time to find a safe spot for it where it will be protected until its next use.
By storing your tonneau cover properly, you’ll be able to enjoy its benefits for years to come.
Conclusion
In conclusion, removing your Extang tonneau cover is as easy as saying “abracadabra!” But instead of relying on magic, we rely on a few simple steps to make your cover disappear right before your eyes. First, start by locating the release lever near the front of the cover. It’s like finding the secret door to a hidden treasure trove.
Give it a firm pull, and the cover will start to unlock, just like a lock yielding to a master thief. Next, walk towards the back of the truck bed, where the real magic happens. Take hold of the cover and give it a gentle tug.
Like a magician’s cape being whisked away, the cover will start to roll up, revealing the hidden treasures beneath. But wait, there’s more! Just when you thought the trick was over, you’ll realize that the cover didn’t actually disappear into thin air. Instead, it cleverly gathers itself into a compact roll at the front of the truck bed.
It’s like a magic trick within a magic trick, leaving you in awe of its ingenuity. Now, all that’s left is to secure the cover in its rolled-up position. This is where a little sleight of hand comes in.
With a few simple clips or straps, you can make sure the cover stays put, just as if it’s under a magician’s spell, defying gravity. And Voila! The Extang tonneau cover is successfully removed, leaving your truck bed open and ready for whatever adventures lie ahead. It’s a trick that’s sure to impress your friends, while also providing practical functionality.
So, the next time you need to remove your Extang tonneau cover, remember these simple steps. And just like a skilled magician, you’ll have your cover off in no time, leaving your truck bed ready for its next act. Who said removing a tonneau cover couldn’t be as fun as watching a magic show?”
Removing your Extang tonneau cover is a fairly simple process that can be easily completed by following these step-by-step instructions.
Now that you’ve safely removed your Extang tonneau cover, it’s time to store it properly. Storing your tonneau cover correctly will help ensure its longevity and protect it from any damage. First, find a clean, dry storage area where the cover won’t be exposed to any harsh elements or extreme temperatures.
A garage or shed would be ideal. Before storing, make sure the cover is clean and dry. Give it a good wipe down to remove any dirt or debris that may have accumulated.
Once clean, you can either fold or roll the cover, depending on the type you have. If it’s a folding cover, carefully fold it along the designated fold lines, being careful not to crease or kink it. If it’s a roll-up cover, gently roll it up, again being careful not to create any creases or kinks.
Finally, secure the cover in its folded or rolled position using any straps or fasteners that may have come with it. This will help keep it compact and prevent any damage while in storage. And there you have it – your Extang tonneau cover is now safely stored away until you’re ready to use it again.
Remember to always use the correct tools and handle your tonneau cover with care to avoid any damage.
Step 5: Safely store your tonneau cover After removing your tonneau cover, it’s important to store it properly to avoid any damage. Remember, these covers are designed to protect your truck bed from the elements, so treating them with care will ensure their longevity. First, make sure to clean the cover thoroughly before storing it.
Use mild soap and water to remove any dirt or debris, and allow it to dry completely. Once dry, fold the cover neatly to prevent any creasing or folding marks. If your tonneau cover has a soft vinyl material, you can roll it up instead of folding it.
This method will help to keep the material in better shape. Next, find a suitable storage location for your tonneau cover. Ideally, it should be kept indoors to protect it from extreme weather conditions.
If that’s not possible, consider using a garage or a shed. Make sure the storage area is clean and dry to prevent any mold or mildew from forming on the cover. If you’re storing the cover for an extended period, you can also consider covering it with a protective cover or a tarp for added protection.
Additionally, you may want to invest in a storage bag specifically designed for tonneau covers. These bags provide extra protection and make it easier to transport and store your cover. They often come with handles or straps for convenience.
With the cover properly cleaned, folded or rolled, and stored in a suitable location, you can rest assured that it will be safe and ready to use whenever you need to put it back on your truck. Remember to always use the correct tools and handle your tonneau cover with care to avoid any damage. By following these steps, you can prolong the life of your tonneau cover and keep it looking its best for years to come.
FAQs
How do I remove an Extang tonneau cover?
To remove an Extang tonneau cover, start by opening the cover and removing any straps or bolts that hold it in place. Then, lift the cover off the truck bed and set it aside. Repeat the process in reverse to reattach the cover.
Are there any specific tools required to remove an Extang tonneau cover?
Generally, removing an Extang tonneau cover doesn’t require any specialized tools. However, a socket wrench or a screwdriver may be needed to remove any hardware that secures the cover to the truck bed.
Can I remove an Extang tonneau cover by myself, or do I need assistance?
You can remove an Extang tonneau cover by yourself, although having another person to help can make the process easier, especially if the cover is large or heavy. It’s always a good idea to consult the manufacturer’s instructions for specific guidance.
How long does it take to remove an Extang tonneau cover?
The time it takes to remove an Extang tonneau cover can vary depending on factors such as the type of cover and the familiarity with the removal process. On average, it may take around 15-30 minutes to remove the cover completely.
Is there a recommended method for storing the removed Extang tonneau cover?
Extang tonneau covers are typically designed to be stored by leaning them against a wall, either vertically or at a slight angle. It’s important to ensure that the cover is stored in a clean and dry area, away from any potential damage or debris.
Are there any precautions I should take before removing an Extang tonneau cover?
Before removing an Extang tonneau cover, make sure the truck bed and cover are clean and free from any debris. Additionally, check for any loose or damaged hardware that may need to be addressed before removing the cover.
Can I remove an Extang tonneau cover if it’s installed with a bed liner?
Yes, an Extang tonneau cover can be removed even if it’s installed with a bed liner. However, you may need to remove any additional hardware or bolts that secure the cover to the liner. It’s recommended to consult the specific installation instructions for guidance.
